|Year : 2020 | Volume
| Issue : 1 | Page : 15-19
Comparative evaluation of ion release in bonded and nonbonded stainless steel brackets with use of different mouthwashes: An In vitro study
DP Shruthi1, GS Patil2, DR Prithviraj3
1 Department of Orthodontics and Dentofacial Orthopaedics, Government Dental College & Research Institute, Bengaluru, Karnataka, India
2 Dayananda Sagar College of Dental Sciences, Bengaluru, Karnataka, India
3 Department of Prosthodontics, Government Dental College & Research Institute, Bengaluru, Karnataka, India
|Date of Submission||15-Jan-2019|
|Date of Decision||28-Jan-2020|
|Date of Acceptance||21-Feb-2020|
|Date of Web Publication||13-Jul-2020|
Dr. D P Shruthi
Government Dental College and Research Institute, Bengaluru - 560 002, Karnataka
Source of Support: None, Conflict of Interest: None
| Abstract|| |
Background: Orthodontic treatment is a long-term procedure that involves the usage of brackets and archwires which are mainly metallic in nature. This study evaluated the levels of metal ions release from bonded and nonbonded orthodontic brackets after immersion in distilled deionized water and three different types of mouthwash. Materials and Methods: Eighty premolar stainless steel brackets (3M, Unitek) were divided into Group A (bonded brackets) and Group B (nonbonded brackets). Each group was further subdivided into four subgroups to analyze the release of ions from three different types of mouthwash along with the control group. All the samples were incubated at 37°C for 45 days, and immersion solutions were tested in inductively coupled plasma-optical emission spectrometer for the release of free metal ions. Results: Mean ion release in the bonded bracket group was less than that of nonbonded bracket group. Ion release in control subgroup of both groups was 0.18 ± 0.08 μg/dl (A1) and 0.17 ± 0.06 μg/dl (B1); in Phos-Flur mouthwash subgroup was 0.12 ± 0.06 μg/dl (A2) and 0.13 ± 0.05 μg/dl (B2); in chlohex mouthwash subgroup was 0.13 ± 0.06 μg/dl (A3) and 0.14 ± 0.06 μg/dl (B3); in Hiora mouthwash subgroup was 0.10 ± 0.06 μg/dl (A4) and 0.12 ± 0.05 μg/dl (B4). Conclusions: The mean ion release was the highest in deionized water (control group) followed by chlohex, Phos-Flur, and Hiora in both Group A and Group B. Ion leaching from bonded brackets was less compared to nonbonded brackets in all different mouthwashes except in the control group. However, this difference was statistically insignificant (P > 0.05) between all the groups.
Keywords: Bonded brackets, ion release, mouthwashes, nonbonded brackets
|How to cite this article:|
Shruthi D P, Patil G S, Prithviraj D R. Comparative evaluation of ion release in bonded and nonbonded stainless steel brackets with use of different mouthwashes: An In vitro study. Contemp Clin Dent 2020;11:15-9
|How to cite this URL:|
Shruthi D P, Patil G S, Prithviraj D R. Comparative evaluation of ion release in bonded and nonbonded stainless steel brackets with use of different mouthwashes: An In vitro study. Contemp Clin Dent [serial online] 2020 [cited 2021 Jan 27];11:15-9. Available from: https://www.contempclindent.org/text.asp?2020/11/1/15/289538
| Introduction|| |
Metallic appliances are an integral part of orthodontic treatment. During the last decade, there has been an increased interest among dental and biomedical professionals in the side effects associated with the use of biomaterials, especially the metallic materials. Fixed appliances in orthodontics involve brackets, archwires, etc., that are mainly metallic in nature. These brackets and archwires consist of precious (gold, silver, palladium, and platinum) or nonprecious metals (nickel, chromium, molybdenum, cobalt, titanium, zinc, tin, and mercury). These brackets are exposed to the oral cavity, which is a potentially hostile environment where electrochemical corrosion phenomena can occur.,
Since the oral environment is particularly ideal for the biodegradation of metals because of its ionic, thermal, microbiologic, and enzymatic properties, some level of patient exposure to the corrosion products of these alloys could be assumed, if not assured. In recent years, it has been reported that bracket corrosion can occur in the oral environment.,,,,,,
Approximately 10% of the general population has a hypersensitive reaction to nickel. Peltonen reported that women are ten times more sensitive to nickel than that of men. Nickel can cause hypersensitivity, contact dermatitis, asthma, and cytotoxicity. Therefore, the amount of metal ion intake from dental alloys has become a topic of increased interest.
During orthodontic treatment, patients are recommended to use mouthwashes, since most of them are adolescents who do not always follow a satisfactory oral-hygiene regimen and have a high risk of dental caries. The regular use of fluoride-containing products such as toothpaste, and fluoride mouthwashes is also recommended to reduce the risk of dental caries. However, numerous studies have shown that in an acidic environment and in the presence of fluoride ions (fluoride mouthwashes), the corrosion resistance of certain materials, in particular, Ti, can deteriorate.,,,, Although fluoride ions in the prophylactic agents have been reported to cause corrosion, little information is available regarding the effect of different mouthwashes in the ion release of orthodontic brackets.
Chlorhexidine is one of the most commonly prescribed mouthwashes with the anti-bacterial property.
Herbal mouthwashes are another group that is finding increased application. Hiora mouthwash is one such mouthwash, manufacturer of which claim antimicrobial, antiplaque, antiseptic, and analgesic properties. This mouthwash has been known to have active herbal ingredients that act against common strains of oral bacteria and fungi and prevent periodontal disease and dental caries.
No previous studies have been performed to assess the influence and clinical implications of all these three different varieties of mouthwashes on orthodontic brackets in standard conditions. In addition, there has been very limited literature to compare the corrosive properties of bonded and nonbonded brackets. Hence, the present study is carried out to evaluate and compare the corrosive properties of bonded and nonbonded brackets.
| Materials and Methods|| |
This study was done to evaluate and compare the corrosive properties (by testing metal ion release) of bonded and nonbonded brackets in distilled deionized water and three types of mouthwash routinely recommended by orthodontists to their patients by using inductively coupled plasma optical emission spectrometer (ICP-OES). Ethical clearance was obtained from the Institutional Ethical Committee and Review Board of the Dayanand Sagar College of Dental Sciences, Bangalore, India.
Preparation of samples
Eighty premolar stainless steel brackets (3M, Unitek, Germany) were used for this study. All brackets were used as received from the manufacturer. These eighty brackets were divided into two major groups, A and B (40 in each group).
Group A contains the brackets that were bonded to the premolar tooth. Group B contains nonbonded brackets. Premolars extracted for the orthodontic purpose were used for bonding the brackets (Group A).
The bonded test specimens (Group A) were prepared as follows:
The selected teeth were stored in 2% hydrogen peroxide for 10 days to be free from all the debris. After this, the teeth were polished with pumice, air dried, and etched for 30 s for the bonding procedure. A bonding agent (Transbond XT Bonding System, 3M, Unitek, Germany) was used to bond the brackets to the extracted teeth using visible light cure (QHL75, Dentsply, York, PA, USA). Curing was done for 10 s as specified by the manufacturer. The same standardized procedure was followed for bonding all the samples.
Bonded specimens (Group A) were subdivided as follows:
- Group A1 – Ten brackets bonded to the tooth, and the assembly immersed in distilled deionized water (control group)
- Group A2 – Ten brackets bonded to the tooth, and the assembly immersed in Phos-Flur mouthwash
- Group A3 – Ten brackets bonded to the tooth, and the assembly immersed in clohex mouthwash
- Group A4 – Ten brackets bonded to the tooth, and the assembly immersed in Hiora mouthwash.
Group B consisted of nonbonded brackets which were subdivided as follows:
- Group B1 – Ten brackets immersed in distilled deionized water (control group)
- Group B2 – Ten brackets immersed in Phos-Flur mouthwash
- Group B3 – Ten brackets immersed in chlohex mouthwash
- Group B4 – Ten brackets immersed in Hiora mouthwash.
Both the bonded brackets and the nonbonded brackets were stored in 5 ml glass vials immersed in the respective solutions and incubated in an incubator at 37°C for 45 days. After the incubation period, the immersion solutions were tested in an ICP-OES for the release of free metal ions.
Evaluation of the leached ions
The determination of the elements leached from the brackets was done with ICP-OES. ICP-OES is one of the most powerful and popular analytical tools for the determination of trace elements in a myriad of sample types. The technique is based on the spontaneous emission of photons from the atoms and ions that have been excited in a radio frequency discharge.
| Results|| |
The corrosive properties of bonded and nonbonded brackets in distilled deionized water and three different types of mouthwash were assessed using ICP-OES and were subjected to the statistical analysis. The results were analyzed using the two-way analysis of variance and Bonferroni test.
Mean ions leached out in these eight groups are tabulated in [Table 1] and [Table 2].
The results were then subjected to statistical analysis. During the statistical analysis, the comparison was made between the subgroups of Group A, i.e., to compare the ions leached out in various immersion solutions by the bonded brackets and the subgroups of Group B, i.e., to compare the ions leached out in various immersion solutions by the nonbonded brackets to the tooth [Table 3] and [Table 4].
|Table 3: Comparison of mean ions released in the four subgroups of Group A|
Click here to view
|Table 4: Comparison of mean ions released in the four subgroups of Group B|
Click here to view
The comparisons were also made to estimate the difference in the ions leached out when the brackets are bonded, i.e., between bonded and nonbonded brackets (A1 vs. B1, A2 vs. B2, A3 vs. B3, and A4 vs. B4) [Table 5].
The difference in mean ion release was found to be statistically significant between A1 and A2 (P < 0.001), A1 and A3 (P < 0.01) as well as between A1 and A4 (P < 0.001). No statistically significant difference was observed between the other pair of groups (P > 0.05) [Table 3].
The difference in mean ion release was found to be statistically significant between B1 and B2 (P < 0.01) as well as between B1 and B4 (P < 0.001). No statistically significant difference was observed between the other pair of groups (P > 0.05) [Table 4].
Hence, it may be summarized that ion release after bonding of the brackets to the teeth decreased in all the test mouthwashes but increased in distilled deionized water. However, this difference was statistically insignificant (P > 0.05) between all the groups [Tables 5].
| Discussion|| |
During orthodontic treatment, the orthodontic attachments are exposed to a potentially hostile environment where electrochemical corrosion can occur, leading to the release of various metal ions. The release of these metal ions may have a deleterious effect on the health of the patient. Amini et al., in theirin vivo study, also concluded that the presence of a fixed orthodontic appliance leads to an increase in metal ions in saliva.
Mouthwashes prescribed during orthodontic treatment are recommended to be used twice a week for about a minute. However, it is recommended that after mouthwash, the patient must not eat, drink, and rinse, so that the components of mouthwash are present in the oral cavity for a long time; it is difficult to determine the exact duration of contact between brackets and mouthwashes.
According to Danaei et al., each time the mouthwash was used by the patient, the substantively lasted for approximately 6 h in the patient's mouth. During 24 months of orthodontic treatment, twice a week usage of mouthwash will expose the metal components for approximately 64,000 min (45 days). Hence, in this present study, brackets were incubated in mouthwashes for 45 days.
The findings of this study were similar to the observations made by Danaei et al. In their study, they measured the amount of metal ion release from orthodontic brackets when kept in different mouthwashes. The results of their study showed that ion release in water was significantly (P < 0.05) higher than the three mouthwashes (chlorhexidine, Oral B, and Persica). Higher ion release was found with chlorhexidine compared with the other two mouthwashes. The authors explained the distinct increase in the level of the release of all ions in water to its corrosive nature.
Schiff et al. studied the effect of ion release in fluoride mouthwashes. In their study, they found nickel to be released the most followed by chromium and iron which is similar to the observations made in this present study.
According to Szakalos et al., many parameters affect the corrosion of metals in a water environment, including pH level, oxygen content, water, temperature, and duration of immersion. It has also been reported that the corrosion rates of steel increase with aeration of pure water, and dissolved oxygen in pure water is 5–10 times more aggressive than carbonic acid. The distilled water used in this study had a pH of 7.5; therefore, the water was not acidic, and hence, acidity may not be responsible for its corrosiveness. The reason for corrosiveness might be water which has an extremely low concentration of ions, and the lack of ions makes this solvent one of the most aggressive solvents known. Similar reason may be attributed to the results of the present study also.
A study conducted by Barrett et al. concluded that metal ion release was increased during the 1st week and gradually reduced in subsequent weeks.
A study conducted by Grimsdottir et al. indicated that metal ion released from the orthodontic components can be influenced by the composition employed by different manufacturers. Further, the surface area also plays a crucial role in the corrosion of metals, but determining the surface area of orthodontic brackets with their complex geometry was not done. Variations in study designs make the comparisons between the studies difficult.
According to the guidelines of the European Council Directive for the quality of water intended for human consumption, maximum admissible concentration for metal ions (Ni and Cr) is 5 μg/dl (50 μg/l). The results obtained in our study indicated that the release of the metal ions in all the three mouthwashes and deionized water is well within the permissible limit (0.10–0.17 μg/dl). The above finding is similar to the study by Mikulewicz et al. who concluded that the quantity of metal ions released from the orthodontic appliances is well below the established toxic level.
Mikulewicz et al. studied the release of metal ions from fixed orthodontic appliances in which experimental conditions reflected as closely as possible (in anin vitro system), the environment of the human oral cavity with an orthodontic appliance. They concluded that the highest concentration of metal ions was released at the beginning of the experiment. After this, passivation probably occurred, which hindered further intense release.
Comparisons were also made to estimate the difference in the ions leached out when the brackets are bonded, i.e., between bonded and nonbonded brackets (A1 vs. B1, A2 vs. B2, A3 vs. B3, and A4 vs. B4). The results indicated that the ion release from the bonded brackets decreased in all the mouthwashes as compared to the nonbonded brackets. This could be due to the reduced surface area of the bracket exposed to the mouthwash. However, in the control group (water), the bonded brackets showed increased release of metal ions compared to nonbonded brackets. However, the difference was statistically insignificant (P > 0.05). This is comparable to the findings of Gwinnett who carried out their study at the end of orthodontic treatment.
With increasing use of mouthwashes during orthodontic treatment, further research is required to assess the corrosion of brackets using different mouthwashesin vivo and its possible impact on the overall health of the patient.
| Conclusions|| |
The findings of this study revealed that the amount of metal ion released in all the three types of mouthwash were less than that in deionized water. Among the three types of mouthwash, the metal ion release in herbal mouthwash (Hiora) was the least followed by fluoride-based mouth rinse (Phos-Flur) and chlorhexidine (clohex). However, the metal ion released in all the three mouthwashes and deionized water was within the permissible limit. The limitation of the present study was that, it was anin vitro study and the evaluation method may not simulate the oral environment. Future studies evaluating the samein vivo or simulation techniques mimicking the oral environment may confirm the nature and types of ion release from the orthodontic attachments.
The authors would like to thank the Department of Biotechnology, Tamil Nadu University, Coimbatore, India, for their help in testing ion release from the samples.
Financial support and sponsorship
Conflicts of interest
There are no conflicts of interest.
| References|| |
Vreeburg KJ, de Groot K, von Blomberg M, Scheper RJ. Induction of immunological tolerance by oral administration of nickel and chromium. J Dent Res 1984;63:124-8.
Schiff N, Dalard F, Lissac M, Morgon L, Grosgogeat B. Corrosion resistance of three orthodontic brackets: A comparative study of three fluoride mouthwashes. Eur J Orthod 2005;27:541-9.
Danaei SM, Safavi A, Roeinpeikar SM, Oshagh M, Iranpour S, Omidkhoda M. Ion release from orthodontic brackets in 3 mouthwashes: Anin vitro
study. Am J Orthod Dentofacial Orthop 2011;139:730-4.
Barrett RD, Bishara SE, Quinn JK. Biodegradation of orthodontic appliances. Part I. Biodegradation of nickel and chromium in vitro
. Am J Orthod Dentofacial Orthop 1993;103:8-14.
Nakagawa M, Matsuya S, Shiraishi T, Ohta M. Effect of fluoride concentration and pH on corrosion behavior of titanium for dental use. J Dent Res 1999;78:1568-72.
Boere G. Influence of fluoride on titanium in an acidic environment measured by polarization resistance technique. J Appl Biomater 1995;6:283-8.
Reclaru L, Meyer JM. Effects of fluorides on titanium and other dental alloys in dentistry. Biomaterials 1998;19:85-92.
Nakagawa M, Matsuya S, Udoh K. Corrosion behavior of pure titanium and titanium alloys in fluoride-containing solutions. Dent Mater J 2001;20:305-14.
De Mele MF, Cortizo MC. Electrochemical behaviour of titanium in fluoride-containing saliva. J Appl Electrochem 2000;30:95-100.
Schiff N, Grosgogeat B, Lissac M, Dalard F. Influence of fluoridated mouthwashes on corrosion resistance of orthodontics wires. Biomaterials 2004;25:4535-42.
Schiff N, Grosgogeat B, Lissac M, Dalard F. Influence of fluoride content and pH on the corrosion resistance of titanium and its alloys. Biomaterials 2002;23:1995-2002.
Pröbster L, Dent M, Lin W, Hüttermann H. Effects of fluoride prophylactic agents on titanium surfaces. Int J Oral Maxillofac Implants 1992;7:390-4.
Toumelin-Chemla F, Rouelle F, Burdairon G. Corrosive properties of fluoride-containing odontologic gels against titanium. J Dent 1996;24:109-15.
Kaneko K, Yokoyama K, Moriyama K, Asaoka K, Sakai J, Nagumo M. Delayed fracture of beta titanium orthodontic wire in fluoride aqueous solutions. Biomaterials 2003;24:2113-20.
Amini F, Jafari A, Amini P, Sepasi S. Metal ion release from fixed orthodontic appliances: Anin vivo
study. Eur J Orthod 2012;34:126-30.
Szakalos P, Hultquist G, Wikmark G. Corrosion of copper by water. Electrochem Solid State Lett 2007;10:C63-7.
Grimsdottir MR, Gjerdet NR, Hensten-Pettersen A. Composition andin vitro
corrosion of orthodontic appliances. Am J Orthod Dentofacial Orthop 1992;101:525-32.
Mikulewicz M, Chojnacka K, Woźniak B, Downarowicz P. Release of metal ions from orthodontic appliances: Anin vitro
study. Biol Trace Elem Res 2012;146:272-80.
Mikulewicz M, Chojnacka K, Wołowiec P. Release of metal ions from fixed orthodontic appliance: Anin vitro
study in continuous flow system. Angle Orthod 2014;84:140-8.
Gwinnett AJ. Corrosion of resin-bonded orthodontic brackets. Am J Orthod 1982;81:441-6.
[Table 1], [Table 2], [Table 3], [Table 4], [Table 5]