Contemporary Clinical Dentistry
   
  Home | About us | Editorial board | Search
Ahead of print | Current Issue | Archives | Advertise
Instructions | Online submission| Contact us | Subscribe |

 

Login  | Users Online: 1404  Print this pageEmail this pageSmall font sizeDefault font sizeIncrease font size 



 
 Table of Contents  
CASE REPORT
Year : 2020  |  Volume : 11  |  Issue : 1  |  Page : 83-86  

A novel approach to recreate, rehabilitate, and restore the facial defect with a partial facial mask – An interesting case report


Department of Prosthodontics, Kamineni Institute of Dental Sciences, Nalgonda, Telangana, India

Date of Submission27-Feb-2019
Date of Decision05-Jan-2020
Date of Acceptance25-Feb-2020
Date of Web Publication13-Jul-2020

Correspondence Address:
Dr. C K Anulekha
Professor Department of Prosthodontics, Kamineni Institute of Dental Sciences, Narkatpally, Nalgonda - 508 254, Telangana
India
Login to access the Email id

Source of Support: None, Conflict of Interest: None


DOI: 10.4103/ccd.ccd_155_19

Rights and Permissions
   Abstract 


Facial defects resulting from neoplasm, congenital malformation, or trauma can be restored with facial prosthesis using different materials and retention methods to achieve the life-like appearance and facilitate function. A facial prosthesis can re-establish esthetic form and anatomic contours for midfacial defects, often more effectively than by surgical reconstruction. For successful results, a lot of factors such as harmony, texture, color matching, and blending of tissue interface with the prosthesis are important. This case report describes a novel approach to rehabilitate a patient who had underwent partial rhinectomy as a result of hemangiopericytoma of the nose. This article explains the construction of partial facial mask, which restored the defect involving the left lateral aspect of the nose, medial aspect of the left eye, and the part of the cheek.

Keywords: Maxillofacial defect, maxillofacial prosthesis, partial facial mask, prosthesis


How to cite this article:
Anulekha C K, Swetha K, Sudhir N, Reddy RM. A novel approach to recreate, rehabilitate, and restore the facial defect with a partial facial mask – An interesting case report. Contemp Clin Dent 2020;11:83-6

How to cite this URL:
Anulekha C K, Swetha K, Sudhir N, Reddy RM. A novel approach to recreate, rehabilitate, and restore the facial defect with a partial facial mask – An interesting case report. Contemp Clin Dent [serial online] 2020 [cited 2020 Aug 8];11:83-6. Available from: http://www.contempclindent.org/text.asp?2020/11/1/83/289508




   Introduction Top


Hemangiopericytoma is a locally aggressive benign tumor of vascular origin. 15% of all hemangiopericytomas are found in the head and neck with a tendency (20%) to occur in the paranasal sinuses and nasal cavity.[1],[2]

The quality of life after rhinectomy is severely compromised if an efficient surgical reconstruction or a prosthetic device is not provided immediately.[3] There are various Maxillofacial materials such as Room temperature vulcanizing silicone (RTV) silicones, Heat temperature vulcanizing silicone (HTV) silicones, foaming silicones, and composites available, which could be used effectively in rehabilitating maxillofacial defects.[4] This case report describes a novel approach to treat a patient with a poor economic background who suffered repeated episodes of hemangiopericytoma and was emotionally and psychologically affected. The purpose of this clinical report is to describe a custom sculpted definitive partial facial mask made of acrylic resin and retained by eyeglasses.[5]


   Case Report Top


A 31-year-old female reported with a history of developing a progressing mass 7 years ago on the left lateral wall of the nose with the symptoms of epistaxis, which further lead to the unilateral nasal obstruction which was not relieved with medication. She underwent four surgical interventions in a span of 6 years in various hospitals at Bengal, Bhopal, and Kolkata due to the recurrence of the tumor to a huge size of almost resembling an elephant trunk [Figure 1]a and [Figure 1]b. Under histopathological examination, the tumor was diagnosed as “HEMANGIOPERICYTOMA.” The lesion was surgically removed, and subsequently, the patient was made to undergo radiotherapy and chemotherapy. The extensive surgery left her with huge embarrassment and humiliation whenever she interacted.
Figure 1: (a and b) Preoperative photograph showing huge elephant trunk appearance of the patient. (c and d) Postoperative photograph showing the disfigurement of the face due to repeated surgeries

Click here to view


During the examination, the patient-related dissatisfaction with her appearance and was especially concerned about her facial disfigurement [Figure 1]c. There were a large septal perforation and the bilateral absence of mucous blanket, which lead to mucosal atrophy [Figure 1]d. Thus, there was a postoperative nasal breathing dysfunction. The only provision of breathing for the patient was through the large defect after excision of the tumor.

This defect was elliptical with obliterated edges measuring about 6 cm long and 2 cm wide with a depth of more than that 3 cm along the left side of the face [Figure 1]c. The exposed structures of the defect were conchae and meatus with an intact nasal bone, lateral part of the septal cartilage, frontal process of maxilla, and medial wall of the orbit and the cribriform plate of the ethmoidal bone [Figure 1]d. With the existing situation, the patient was extremely depressed psychologically, and hence, it was important to treat with an interdisciplinary approach of psychiatry, and ENT. Once the patient was got to a confidence level, a prosthodontic approach was made.

Various prosthetic treatment modalities ranging from acrylic resin partial facial mask to an implant-retained silicone prosthesis[6] were explained and discussed with the patient. Due to economic constraints and remoteness of her area of residence, the patient denied to come for repeated recalls and reviews. Hence, the prosthesis made of polymethyl methacrylate (PMMA) resin was chosen to be made. There was absolutely no viable bone left over to plan for implant-supported Maxillofacialprosthesis (MFP). Hence, it was decided to use a spectacle glass frame for retaining the prosthesis.

  1. The patient was draped, and the petroleum jelly was applied to the patient's eyebrows and eyelashes. Moist gauze was packed to prevent the flow of material into the undesired areas of the defect, and an impression was made of the defect and adjacent tissues using an alginate in a semi-upright position to minimize tissue bed distortion [Figure 2]a
  2. The impression was then poured with the type III dental stone (Kala Stone; Kala Bhai Pvt Ltd., Mumbai, India) to achieve a cast [Figure 2]b. A model of the prosthesis was sculpted on the facial cast with No. 2 dental modeling wax (MDM Corporation; Delhi, India). Taking into account the patient's general appearance, the esthetic contours were developed. With repeated surgeries, the patient was suffering from nasal stenosis due to which she was unable to breathe through her nares instead the only possible way she could breathe was through the defect. Hence, closing the defect with the prosthesis would make her inconvenient to breathe. Therefore, it was planned to incorporate two slits on the facial prosthesis, to facilitate the passage of air to make her comfortable to breathe [Figure 2]c and [Figure 2]d
  3. In the wax pattern, two longitudinal vents were then provided on the patient's left lateral wall resembling part of the wax pattern as a provision for breathing for the patient [Figure 2]e
  4. The wax pattern adaptation on the patient's face was checked, especially in the border areas for the close adaptation [Figure 2]e
  5. Spectacles with a thicker frame with the power of the patient were chosen and adapted at the nasal bridge area of the wax pattern to increase the surface area and close adaptation of the spectacles to the prosthesis [Figure 2]f
  6. Once the fitting and approximation have been confirmed, further laboratory procedures of dewaxing and acrylization have been followed
  7. Care should be taken, that the vents should be blocked out with an elastomeric putty material. As the wax pattern to be processed had made contours and undercuts, a three-part mold pouring (multisectional mold)[7] was necessary to achieve easy placement of acrylic. Investing the wax pattern in the lower half of a large flask was the first pour. Apply separating medium to the stone surface. Invest the posterior undercut surface of the wax pattern with dental stone. The walls of this section must cover toward the center of the flask and are considered as a second pour. The dental stone should be at least 0.5 cm thick in all areas. Apply separating medium to the stone surfaces. Invest the lower half of the wax pattern with the third pour of dental stone and close the lid, and further acrylization was carried out by short curing cycles
  8. Heat cure polymethyl-methacrylate material of three shades, namely tooth colored, pink, and clear acrylics were chosen. Shade matching was done by intrinsically staining the material with acrylic stains
  9. crylization of the prosthesis was carried out by short curing cycles. The final prosthesis was been tried on the patient, and shade matching was done by extrinsic staining
  10. The placement of the prosthesis was demonstrated to the patient and was then delivered. Detailed instructions regarding care and use were provided to the patient [Figure 3].
Figure 2: (a) Alginate impression. (b) Stone cast model of the face. (c and d) Wax pattern of the prosthesis. (e) Wax pattern adapted to the defect. (f) Wax pattern retained by spectacles

Click here to view
Figure 3: Preprosthetic and postprosthetic pictures

Click here to view


The patient was scheduled for the first postinsertion adjustments, 1 day after the insertion to ensure the health of the tissues and to relieve the prosthesis for pressure areas on the tissues.

At the follow-up evaluation after 2 weeks, the prosthesis appeared to be functioning within normal limits. The patient was then asked to come for recall visit once in every 3 months for the evaluation of prosthesis and observation of any recurrence.


   Discussion Top


Facial defects result in multiple functional and psychosocial difficulties. Surgical reconstruction techniques, prosthetic rehabilitation, or a combination of both the methods to restore these facial disfigurements may improve the level of function and self-confidence for patients.[8]

Prosthetic rehabilitation can be preferred over reconstructive surgery due to the probability of recurrence, complexity, and subjecting the patient to another trying period of the surgical reconstruction procedure, radiation therapy, esthetic importance, and it is easy to reproduce the former shape, size, and color of the tissues.[9]

Patient education is perhaps, the first step in the rehabilitation. Before surgery, it is important to familiarize the patient with the functional and cosmetic expectations and limitations of the maxillofacial prosthesis.

Providing adequate retention and airway in nasal prostheses were considered to improve the patients function and comfort. Further, the prosthesis was designed like a shim to reduce the bulk of the prosthesis and making it lightweight.[10]

The patient was treated more likely with an interdisciplinary team approach involving an ENT, psychiatrist, ophthalmology, radiologist, and general medicine.

Mechanical devices such as eyeglass frames as used for this patient are not useful in patients with a flat residual tissue bed, and gravity may cause vertical displacement.


   Conclusion Top


Defects resulting from diseases such as hemangiopericytoma can be rehabilitated using prosthetic rehabilitation so that the patient more comfortably and confidently resumes the regular daily activity. In countries like India, where the cost of the treatment is still a primary concern for the patient, PMMA resin can be used as the best choice of material for the definitive prosthesis.

Declaration of patient consent

The authors certify that they have obtained all appropriate patient consent forms. In the form the patient(s) has/have given his/her/their consent for his/her/their images and other clinical information to be reported in the journal. The patients understand that their names and initials will not be published and due efforts will be made to conceal their identity, but anonymity cannot be guaranteed.

Financial support and sponsorship

Nil.

Conflicts of interest

There are no conflicts of interest.



 
   References Top

1.
DeVita, Hellman, and Rosenberg's. Cancer: Principles & Practice of Oncology Review. 4th Ed. Philadelphia:Walters kulters Health / Lippincott Williams & Wilkins;2016.  Back to cited text no. 1
    
2.
Yasui R, Minatogawa T, Kanoh N, Nakata Y, Kubota A. Nasal septal hemangiopericytoma-like tumor: A case report with an immunohistochemical study. Am J Rhinol 2001;15:267-70.  Back to cited text no. 2
    
3.
Brunski JB, Puleo DA, Nanci A. Biomaterials and biomechanics of oral and maxillofacial implants: Current status and future developments. Int J Oral Maxillofac Implants 2000;15:15-46.  Back to cited text no. 3
    
4.
Phillips RW, Margetis PM, Urban JJ, Leonard F. Materials for the fabrication of maxillofacial prosthesis. In: Chalian VA, Drane JB, Standish SM, editors. Maxillofacial prosthetics. Baltimore: The Williams and Wilkins Company; 1972. p. 63-88.  Back to cited text no. 4
    
5.
Gelareh A, Ali M, Mangoli AA. A technique for the fabrication of a more retentive nasal prosthesis. J Prosthet Dent 2009;9:36-8.  Back to cited text no. 5
    
6.
Beumer J, Curtis TA, Marunick MT. Maxillofacial Rehabilitation: Prosthodontic and Surgical Considerations. 2nd ed. St Louis: Ishiyaku Euroamerica; 1996. p. 404.  Back to cited text no. 6
    
7.
Webb EL, White JT. Multisectional mold for fabrication of prosthetic ears. J Prosthet Dent 1979;41:586-91.  Back to cited text no. 7
    
8.
Guttal SS, Patil NP, Shetye AD. Prosthetic rehabilitation of a midfacial defect resulting from lethal midline granuloma – A clinical report. J Oral Rehabil 2006;33:863-7.  Back to cited text no. 8
    
9.
Harrison lB, Sessions RB, Kies MS. Management of Head and Neck Cancer. A Multi-Disciplinary Approach. 4th ed. Philadelphia: JD Lippincott Co; 2013.  Back to cited text no. 9
    
10.
Taylor TD. Clinical and Maxillofacial Prosthetics. 1st ed. Illinois: Quintessence Publishing Co, Inc; 2000.  Back to cited text no. 10
    


    Figures

  [Figure 1], [Figure 2], [Figure 3]



 

Top
 
  Search
 
    Similar in PUBMED
   Search Pubmed for
   Search in Google Scholar for
 Related articles
    Access Statistics
    Add to My List *
* Registration required (free)  

 
  In this article
    Abstract
   Introduction
   Case Report
   Discussion
   Conclusion
    References
    Article Figures

 Article Access Statistics
    Viewed68    
    Printed4    
    Emailed0    
    PDF Downloaded22    
    Comments [Add]    

Recommend this journal