Contemporary Clinical Dentistry
   
  Home | About us | Editorial board | Search
Ahead of print | Current Issue | Archives | Advertise
Instructions | Online submission| Contact us | Subscribe |

 

Login  | Users Online: 570  Print this pageEmail this pageSmall font sizeDefault font sizeIncrease font size 



 
 Table of Contents  
CASE REPORT
Year : 2014  |  Volume : 5  |  Issue : 1  |  Page : 138-141  

Palatogram revisited


1 Department of Prosthodontics, Tagore Dental College and Hospital, Chennai, Tamil Nadu, India
2 Department of Prosthodontics, Saveetha University, Chennai, Tamil Nadu, India

Date of Web Publication13-Mar-2014

Correspondence Address:
Ashish R Jain
R House C1, No. 3, Manonmani Ammal Road, Pavapuri, Kilpauk, Chennai - 600 010, Tamil Nadu
India
Login to access the Email id

Source of Support: None, Conflict of Interest: None


DOI: 10.4103/0976-237X.128696

Rights and Permissions
   Abstract 

It is the responsibility of the dentist to fabricate a denture that is fully functional and perfectly esthetic. One prime oral function that has always been overlooked in this regard is speech. It has been thought that speech will follow mere replacement of teeth and that it is the patient's duty to fine tune this function with practice. Phonetics, esthetics, function and comfort form the foundation of a successful prosthodontic treatment. Accurate approximation of palatal contours of a maxillary complete denture to a patient's tongue can improve speech intelligibility, if other factors such as tooth position, occlusal plane and occlusal vertical dimension are satisfactory. Customizing palatal contours of a maxillary complete denture can be accomplished by using tissue-conditioning material, which provides sufficient working time for a patient to pronounce a series of sibilant sounds while recording dynamic impression of the tongue. This article describes a technique of obtaining palatogram and customizing palatal contours of a maxillary complete denture with autopolymerizing acrylic resin to improve the intelligibility of speech.

Keywords: Complete denture, palate, palatogram, phonetics, sounds, speech


How to cite this article:
Jain AR, Venkat Prasad M K, Ariga P. Palatogram revisited. Contemp Clin Dent 2014;5:138-41

How to cite this URL:
Jain AR, Venkat Prasad M K, Ariga P. Palatogram revisited. Contemp Clin Dent [serial online] 2014 [cited 2019 Jul 19];5:138-41. Available from: http://www.contempclindent.org/text.asp?2014/5/1/138/128696


   Introduction Top

"Speech is the use of systematized vocalization to express verbal symbols or words." (Sheridan: 1964). Speech is a very sophisticated autonomous and unconscious activity. Speech in matured man is a learned habitual neuromuscular pattern which makes use of anatomical structures designed primarily for respiration and deglutition. Because oro-dental morphological features also may influence an individual speech, the dentist should therefore recognize the possible role of prosthetic treatment on speech activity. [1],[2]

Aim

This article describes a technique of obtaining palatogram and customizing palatal contours of a maxillary complete denture with autopolymerizing acrylic resin to improve the intelligibility of speech.


   What is Palatogram? Top


A palatogram is a graphic representation of the area of the palate contacted by tongue during a specified activity, usually speech-GPT 8.

J. Oakley Coles, in 1871, was the first to use palatograms. [3]

Indications of palatogram

  • Used with implant - supported maxillary dentures. Deviation from ideal palatal contours is often encountered with maxillary implant-supported dentures. This can be caused by implant anplation problems, diminished restor-ative space and bulky attachment mechanisms
  • The evaluation of maxillary denture placement in the sensory - or muscularly impaired patient. An analysis of the space of donder in patients suffering from a loss of motor function can be simplified by the use of a palatogram
  • Evaluation of speech patterns and food bolus management in the orally disabled or geriatric patient may include palatal contour assessment.



   A Technique of Obtaining Palatogram to Shape the Palatal Surface of Denture Top


In this technique the only additional equipment necessary for palatogram is non-scented talc, in inexpensive soft bristle brush for dusting the talc on the palate and a glass marking pencil to outline the contact area. [1] Palatograms can be easily and quickly made on the trial or processed denture if the following steps are recalled.

Various other recording medium can be used are:

  • Gothic arch tracing ink
  • Pressure indicating media
  • Powders-gypsum products, talc, alginate
  • Occlude aerosol
  • Impression waxes.


Step 1: Verification of recorded dimensions

  • Verify the correct vertical dimension in your patient
  • Verify the arrangement of teeth
  • Verify the occlusal plane of a trial or processed denture.


Step 2: Application of recording medium

  • Dry the palatal surface of maxillary denture thoroughly before dusting non-scented talc (do not use regular or surgical talc) and shake off the excess powder.


Step 3: Insertion of coated maxillary denture

  • Train the patient to pronounce the sound and open the mouth without again contacting the palate
  • Avoid touching dusted palate with the fingers during insertion, but ensure that the denture is well seated before the sound is pronounced.


Step 4: Pronunciation of palatolingual consonant sounds and recording the palatogram

  • Instruct the patient to articulate various palatolingual consonants sounds for example s, sh, ch, n, k etc
  • Use vowel "O" with the consonant to be studied, even though the combination is not a word; i.e. to study k, use ko; to study ch; use cho. This is according to Allen's protocol where o is the only vowel was tongue does not make any contact with palate. This is combined with other consonants to avoid multiple recordings of tongue to palate [2]
  • The patient should be asked to repeat the desired sound only two consecutive times. Then the denture should be carefully removed
  • Be sure the patient makes definite palatal contact in pronouncing the sound, but avoids palatal contact after opening the mouth
  • Avoid contacting the palate with the fingers when removing the denture.


Step 5: Evaluation of recordings

  • Outline the contact area with a wax carver where wax is present,(in wax trial denture) and with a glass-marking pencil (in processed denture)
  • Note: Each individual will produce a similar palatogram for a given sound; however there will be certain unique characteristics for that particular person because variations in shape and size of tongue and palatal vault arch form.



   Case Report of an UnderContoured Palate of a Maxillary Complete Denture Top


A 45-year-old man patient reported to our hospital (Saveetha Dental College and Hospital, Saveetha University, Chennai, India) with a chief complaint that he could not speak fluently. The patient had no relevant medical history. On intraoral examination maxillary denture revealed undercontoured palate. The following steps were followed for recording a palatogram as mentioned above.

Palatogram recordings using English as well as Tamil consonants: [4],[5],[6],[7]

  • "S" sound palatogram using word "SO" [Figure 1]
  • "Sh" sound palatogram using word "SHOW"/Nashtam [Figure 2]
  • "Ch" sound palatogram using word "CHOKE"/Pachai [Figure 3]
  • "N" sound palatogram using word "NO"/Mannan [Figure 4]
  • "G and K" sound palatogram using word "GIVE KING"/Jeevan/kaakka [Figure 5].
Figure 1: "S" sound palatogram using word "So"

Click here to view
Figure 2: "Sh" sound palatogram using "Show"/Nashtam

Click here to view
Figure 3: "N" sound palatogram using No/Mannan

Click here to view
Figure 4: "Ch" sound palatogram using Choke/Pachai

Click here to view
Figure 5: "G and K" sound palatogram using Give King/Jeevan/ kaakka

Click here to view
Figure 6: Palatally countoured finished and polished denture

Click here to view


After recording the palatogram using the above mentioned various palatolingual consonants, the form of palatal surface was contoured using acrylic burs in order to create the desired shape of contact areas.


   Case Report of an OverContoured Palate of A Maxillary Complete Denture Top


A 53-year-old man patient reported to our hospital (Saveetha Dental College and Hospital, Saveetha University, Chennai, India) with a chief complaint that he could not speak fluently. The patient had no relevant medical history. On intraoral examination maxillary denture revealed overcontoured palate. The following steps were followed for proper contouring of an overcontoured palate.

Stepwise solution of an overcontoured maxillary denture: [8]

  • Draw an outline of the surface that requires correction with a pencil
  • Prepare a thick mixture of tissue-conditioning material (coe-comfort; gc America, inc, alsip, ill) by adding 25% more of the powder than recommended by the manufacturer and spread an adequate amount of the mixture only on the outlined surface
  • Insert the maxillary denture with the tissue conditioner in place and have the patient completely read each of the 10 stimulus sentences [Table 1], [Table 2] and [Table 3], without repeating the same sentence twice and continue doing so for about 5 min at a rate faster than a normal speaking rate
  • Evaluate the patient's speech for clarity
  • Remove the denture from the mouth, once initial polymerization occurs. If the prosthesis is a waxed trial denture, stop at this step for processing
  • Fill the intaglio surface of the denture and the base of a denture processing flask with a mixture of laboratory plaster and pumice to make it easier to retrieve the denture
  • Lightly lubricate the set mixture of laboratory plaster and pumice with petrolatum, put the upper half of the flask in place, leaving the area of tissue conditioner uncovered
  • Fill the upper half of the flask with the appropriate amount of plaster and completely close the lid
  • After the plaster has set, open the lid. Remove the tissue conditioner from the denture
  • Mix autopolymerizing repair resin according to the manufacturer's instructions and place the appropriate amount of the mixture on the denture to replace the tissue conditioner. Use autopolymerizing acrylic resin because it is relatively easy to work with, inexpensive, less time consuming and dimensionally stable. Note that both the adhesive strength and color stability of an autopolymerizing acrylic resin are adequate for use in a low stress and non-visible area such as the palate of a maxillary complete denture
  • Coat the plaster with a separating medium and completely close the plaster and the lid. Place the assembled flask in the pneumatic or a hand bench press and slowly squeeze out the excess resin
  • Once the repair resin has polymerized, retrieve the denture from the flask
  • Carefully finish with laboratory carbide burs and polish the corrected palatal contour with a wet buffing wheel and pumice [Figure 6]
  • Evaluate the intelligibility of/s/and/sh/sounds with the denture.
Table 1: Specific speech sounds


Click here to view
Table 2: Manner of production - Hindi consonants


Click here to view
Table 3: Manner of production-English consonants


Click here to view



   Conclusion Top


Speech difficulties as sequelae of oral rehabilitation with complete dentures are generally a transient problem. When encountered the difficulties may not be easily solved. Therefore efforts should be made to avoid them by pretreatment records or assessment of speech and provision of information to patients about likely initial deviation from normal speech, immediately following oral rehabilitation. Hence a prosthodontist play a pivotal role in understanding the basic mechanisms involved in the various speech pathology and provide prudent treatment for the same to enhance an individual's personality. More research needs to be carried out in this field to make our rehabilitative treatment complete, with ideal esthetics and optimum function

 
   References Top

1.Jain AR, Jain SA. Text Book on Phonetics in Prosthodontics - The Art and Science. 1 st ed. Saarbrucken, Deutschland/Germany: LAP Lambert Academic Publishing; 2013.  Back to cited text no. 1
    
2.Allen LR. Improved phonetics in denture construction. J Prosthet Dent 1958;8:753-63.  Back to cited text no. 2
    
3.Runte C, Lawerino M, Dirksen D, Bollmann F, Lamprecht-Dinnesen A, Seifert E. The influence of maxillary central incisor position in complete dentures on/s/sound production. J Prosthet Dent 2001;85:485-95.  Back to cited text no. 3
    
4.Farley DW, Jones JD, Cronin RJ. Palatogram assessment of maxillary complete dentures. J Prosthodont 1998;7:84-90.  Back to cited text no. 4
    
5.Rieger J, Wolfaardt J, Seikaly H, Jha N. Speech outcomes in patients rehabilitated with maxillary obturator prostheses after maxillectomy: A prospective study. Int J Prosthodont 2002;15:139-44.  Back to cited text no. 5
    
6.Rothman R. Phonetics considerations in denture prosthesis. J Prosthet Dent 1961;11:214-23.  Back to cited text no. 6
    
7.Kong HJ, Hansen CA. Customizing palatal contours of a denture to improve speech intelligibility. J Prosthet Dent 2008;99:243-8.  Back to cited text no. 7
    
8.Tanaka H. Speech patterns of edentulous patients and morphology of the palate in relation to phonetics. J Prosthet Dent 1973;29:16-28.  Back to cited text no. 8
[PUBMED]    


    Figures

  [Figure 1], [Figure 2], [Figure 3], [Figure 4], [Figure 5], [Figure 6]
 
 
    Tables

  [Table 1], [Table 2], [Table 3]



 

Top
 
  Search
 
    Similar in PUBMED
   Search Pubmed for
   Search in Google Scholar for
 Related articles
    Access Statistics
    Add to My List *
* Registration required (free)  

 
  In this article
    Abstract
   Introduction
   What is Palatogram?
    A Technique of O...
    Case Report of a...
   Conclusion
    Case Report of a...
    References
    Article Figures
    Article Tables

 Article Access Statistics
    Viewed2469    
    Printed45    
    Emailed1    
    PDF Downloaded312    
    Comments [Add]    

Recommend this journal