Contemporary Clinical Dentistry
   
  Home | About us | Editorial board | Search
Ahead of print | Current Issue | Archives | Advertise
Instructions | Online submission| Contact us | Subscribe |

 

Login  | Users Online: 479  Print this pageEmail this pageSmall font sizeDefault font sizeIncrease font size 



 
CASE REPORT
Year : 2010  |  Volume : 1  |  Issue : 2  |  Page : 98-102 Table of Contents     

Full-mouth rehabilitation of a case of generalized enamel hypoplasia using a twin-stage procedure


1 ITS CDSR, Ghaziabad, India
2 I.T.S Group of Dental Institutions, Ghaziabad, India
3 Centre for Dental Education and Research, All India Institute of Medical Sciences, New Delhi, India

Date of Web Publication21-Aug-2010

Correspondence Address:
Hari Parkash
ITS Group of Dental Institutions, Murad Nagar, Ghaziabad - 201 206, Uttar Pradesh
India
Login to access the Email id

Source of Support: None, Conflict of Interest: None


DOI: 10.4103/0976-237X.68601

Rights and Permissions
   Abstract 

The dilemma confronting many dentists today is that innovations and well-defined specializations have greatly enlarged the treatment realm for tooth preservation as well as tooth replacement. The objectives should be preservation of the remaining tooth structure, restoration of optimum function, esthetics with least invasive procedures, cost effective, and short treatment time. The number of remaining natural teeth is one of the most widely used method for evaluating oral health and the prosthetic treatment of patients with a mutilated dentition. Though the treatment of these patients can be complex, but there are some important principles applicable in most cases. This case report demonstrates a satisfying full mouth rehabilitation using the Hobo and Takayama twin-stage procedure for a patient with esthetically and functionally compromised dentition. The final prosthesis with this twin-stage technique ensured a restoration with a predictable posterior disclusion and anterior guidance in harmony with the condylar path.

Keywords: Canine-guided occlusion, cusp angle, diagnostic wax-up, twin stage


How to cite this article:
Kar AK, Parkash H, Jain V. Full-mouth rehabilitation of a case of generalized enamel hypoplasia using a twin-stage procedure. Contemp Clin Dent 2010;1:98-102

How to cite this URL:
Kar AK, Parkash H, Jain V. Full-mouth rehabilitation of a case of generalized enamel hypoplasia using a twin-stage procedure. Contemp Clin Dent [serial online] 2010 [cited 2017 Apr 29];1:98-102. Available from: http://www.contempclindent.org/text.asp?2010/1/2/98/68601


   Introduction Top


Dentistry certainly must be an important part of an overall cosmetic upgrade, since improvements in the face and the smile play an important role in changing a person's appearance and improving self-esteem. The phrase full-mouth rehabilitation means different things to different people. Though the full-mouth rehabilitation and its philosophies are often intrigue in nature, but the esthetic and functional accomplishment of rehabilitation is always satisfying. Anterior guidance is crucial in human occlusion because it influences molar disclusion that controls horizontal forces. Molar disclusion is determined by a cusp-shape factor and an angle of hinge rotation. The Hobo-Takayama method for creating molar disclusion by using a twin-stage technique will be described. This technique develops anterior guidance to create a predetermined, harmonious disclusion with the condylar path. Condition 1 is used to incorporate a cusp-shape factor and Condition 2 is used for the angle of hinge rotation. This method does not require special equipment and is an uncomplicated procedure suitable for daily practice. The mystery of establishing the optimal anterior guidance is also clarified, including accurate development of a specific degree of disclusion desired by the dentist.


   Case Report Top


A healthy 25-year-old male reported to the Department of Prosthodontics, Centre for Dental Education and Research, All India Institute of Medical Sciences, New Delhi, with a chief complaint of unsightly appearance due to generalized discolored and small-sized teeth since childhood, generalized sensitivity, and difficulty in chewing [Figure 1]. The patient gave a medical history of epilepsy 7 years back and was under medication for the same condition. The patient's dental history dated back to 10 years when he first noticed discoloration of his both upper and lower teeth. The patient didn't report any symptoms of temporomandibular joint disorder or myofascial pain dysfunction.
Figure 1 : Pre-op views showing discolored and small teeth


Click here to view


Clinical findings

Extraoral: The patient had no facial asymmetry, or muscle tenderness. The mandibular range of motion was within normal limits. The TMJ, the muscles of mastication, and the facial expression were asymptomatic.

Intraoral: There was generalized discoloration of the upper and lower dentition with fair oral hygiene. The mandibular arch was fully dentate and the maxillary arch was having missing 18 and 28. No gross abnormalities were noted in the overall soft tissues of the lips, cheeks, tongue, oral mucosa, and pharynx. A generalized pitting defect was noted. Open contact was present in relation to upper and lower anterior teeth with a midline diastema.

Occlusal: The patient was having mild-to-moderate genralized attrition of dentition with moderate loss of vertical dimension. The patient presented with a bilateral class I molar and canine relationship. The patient demonstrated a slide from centric relation to maximum intercusption. The patient's lateral excursions showed bilateral balanced occlusion. The incisal edge glided along the palatal surfaces of maxillary anteriors during protrusion, along with posterior teeth interference. A freeway space of 2 mm was recorded.

Goals of rehabilitation

The goals were as follows:

  • To rehabilitate the entire hypoplastic dentition in functional harmony with the stomatognathic system
  • To rehabilitate using the twin-stage procedure to produce a definite amount of disocclusion during eccentric movements
  • To develop a canine-guided occlusion.
Treatment procedure

The rehabilitation was carried out as follows:

  1. Maxillary and mandibular impressions were made in the alginate impression material and diagnostic casts were obtained.
  2. Based on patient's moderate loss on vertical dimension, a hypothetical increase of 3 mm in the vertical dimension of occlusion was carried out using a Lucia jig and interocclusal record based on the evaluation of the mounted diagnostic cast in centric relation [Figure 2]. Then the maxillary cast was mounted using face-bow transfer onto a semi-adjustable articulator (Whip-mix) and the mandibular cast mounted was using the Lucia jig and centric relation record.
    Figure 2 : Mounted U/L diagnostic cast with lucia jig and centric record


    Click here to view
  3. Diagnostic wax-up was done at the established new vertical to see the final outcomes [Figure 3]. Keeping in mind the following indications and objectives, we carried out diagnostic wax-up for our full-mouth rehabilitation case:
    Figure 3 : U/L diagnostic Wax-up


    Click here to view


    Indications

    • Anterior guidance requires alteration
    • Existing occlusal scheme requires alteration
    • Vertical dimension need to be changed
    • Mutilated dentition


    Purpose

    • Arch shape and contour
    • To rehearse a proposed restorative plan
    • To explain the intended procedure to the patient
    • To establish the occlusion
    • Dentist can explore all the treatment alternatives before selecting a therapy
    • Provisional restoration
    • To provide additional information to the technician.
  4. Then an occlusal splint was provided to the patient as part of reversible interventional modalities to evaluate adaptation of the patient to altered VDO. The patient was kept in diagnostic and observational period of 6 weeks before the definitive restorative phase of rehabilitation was started.
  5. The teeth were prepared and Stage I temporary restorations were fabricated chairside segment by segment during several appointments to minimize patient discomfort and efficiently use the appointment time [Figure 4] and [Figure 5]. The patient's vertical dimension of occlusion was maintained by using unprepared teeth as occlusal vertical stops. Minimal occlusal reduction is indicated for patients scheduled for rehabilitation at an altered vertical dimension of occlusion. The definitive phase for full coverage metal-ceramic tooth preparations was completed for the entire dentition with minimal occlusal reduction; Stage II temporaries were fabricated using the putty index of the diagnostic wax-up and cemented with ZnO noneugenol cement [Figure 6]. A final full arch impression for maxillary/mandibular teeth was made using heavy-body and light-body impression material in the custom tray and casts were poured in die stone. This assembly was mounted on Whip-mix articulator using the face-bow, Lucia jig, and centric record at the previously determined vertical dimension.
    Figure 4 : U/L tooth preparation and retraction cord in place


    Click here to view
    Figure 5 : Stage I temporaries


    Click here to view
    Figure 6 : Stage II temporaries


    Click here to view
  6. All the wax patterns were cast, and all metal copings were tried in and adjusted as needed [Figure 7]. Definite restorations with PFM crowns exhibiting a vital and natural appearance with proper contour, shade, and optimal incisal translucency were fabricated [Figure 8].
    Figure 7 : Metal copings try-in


    Click here to view
    Figure 8 : PFM crowns


    Click here to view
  7. The articulator was programmed to different conditions of the twin-stage procedure as in [Table 1].
    Table 1 : Articulator adjustment values


    Click here to view


    Fabrication of the cusp angle

    For this, a standard effective cusp angle of 25 was set to Condition 1 of the twin-stage procedure [Table 1] and the maxillary and/or mandibular anterior segment was removed [Figure 9]. Then the occlusal morphology of the posterior PFM crown build-ups was completed and balanced articulation was obtained [Figure 10].
    Figure 9 : Condition 1 (25o Cusp angle)


    Click here to view
    Figure 10 : Establishment of balanced articulation


    Click here to view


    Fabrication of anterior teeth

    The anterior segment of the cast was reassembled. Then, anterior PFM crown build-ups were completed after the values had been adjusted to Condition 2 of the twin-stage procedure [Table 1] to achieve an incisal guidance of 40;, which produced a standard amount of disocclusion. The anterior teeth produced contact on anterior teeth during protrusion and contact on canines during lateral movement [Figure 11].
    Figure 11 : Condition 2 with canine guided occlusion (On articulator and intra oral view)


    Click here to view


  8. Permanent cementation was done with GIC type I luting cement.
  9. Oral hygiene instructions were reviewed, emphasizing brushing habits and the use of floss threaders and dental floss.
  10. Follow-up was carried out at regular intervals and the patient's post-operative condition was satisfactory [Figure 12] and[Figure 13].
    Figure 12 : Post-op intraloral views


    Click here to view
    Figure 13 : Extraoral pre-op and post-op views


    Click here to view



   Discussion Top


Full-mouth reconstructions involving full arch preparations, impressions, provisional restorations, and master casts are regarded as simultaneous reconstructions. A variety of techniques may be used in simultaneous constructions to obtain complete arch dies and mounted casts. These techniques assist in concomitant laboratory construction of the units. When all of the prepared teeth are on a single articulator, there is flexibility in developing the occlusal plane, occlusal theme, embrasures, crown contour, and esthetics. The chairside disadvantages include [1] arduous, unpredictable patient visits, [2] full arch anesthesia, [3] full arch chairside treatment restorations, [4] multiple occlusal records, and [5],[6] possible loss of the vertical dimension of occlusion. Miscellaneous disadvantages are (1) the need for accurate cross-arch multiple tooth impressions and/or (2) the need for transfer techniques to fabricate full arch working casts. [7],[8] An alternative approach to the full-mouth simultaneous reconstruction is to complete one quadrant before beginning another. The advantages of this approach are that it is primarily chairside and includes preparation and final impressions of select teeth, maintenance of vertical dimension, quadrant anesthesia, and shorter, predictable appointments. The disadvantages of the quadrant reconstruction include restrictions for achieving ideal occlusion when altering the vertical dimension, occlusal plane, and embrasure development. The existing opposing dentition limits the reconstruction of an isolated quadrant. Esthetic consistency can be compromised because the porcelain restorations are made in stages. The advantages of the simultaneous and quadrant full-mouth reconstruction are combined in the present technique. The heat-processed treatment restorations are the key factors in providing both clinical and laboratory advantages. They closely resemble the final restorations while maintaining vertical and centric relation, minimizing the need for multiple and complicated occlusal records. Treatment restorations also provide a stable and esthetic interim prosthesis during the fabrication of the final restoration and allow appraisal of an altered vertical dimension of occlusion. The cost and laboratory time involved in fabricating the processed acrylic resin temporary restorations are a limitation but the complexity of the patient's treatment warrants the extra effort. [8] The mechanism of anterior guidance was reviewed from recent mandibular movement studies to provide a basis for understanding the twin-stage technique, which is a practical method for establishing anterior guidance from the condylar path. [9],[10] Anterior guidance and the condylar path previously were considered independent factors. It is an established fact that anterior guidance influences the working condylar path and even changes when the lateral incisal path deviates from the optimal orbit. This supports the hypothesis that anterior guidance and the condylar path are dependent factors. In setting anterior guidance, it is recommended to set the working condyle so that it moves straight outward along the transverse horizontal axis. The angle of hinge rotation produced by the angular difference between anterior guidance and the condylar path assists posterior disclusion but is not solely responsible. The anatomy of the cusps is created by establishing the appropriate form of the posterior cusps aligned to the condylar path; thus it also contributes to posterior disclusion. Posterior disclusion is crucial in controlling harmful lateral forces but the factors that determine the precise amount of disclusion have not been established. The disclusions recorded in healthy adults were 1.1 0.6 mm in protrusive movement and 0.5 0.3 mm on the working side and 1.0 0.6 mm on the nonworking side during lateral movement. These numbers correlated with the deviation in the condylar path. [10] The molars must disclude slightly more than the deviation in the condylar path to avoid occlusal interferences.

 
   References Top

1.Kazis H. Complete mouth rehabilitation through restoration of lost vertical dimension. J Am Dent Assoc 1948;37:19-39.   Back to cited text no. 1      
2.Hausman M, Hobo S. Occlusal reconstruction using transitional crowns. J Prosthet Dent 1961;11:278-87.   Back to cited text no. 2      
3.Braly BV. A preliminary wax-up as a diagnostic aid in occlusal rehabilitation. J Prosthet Dent 1966;16:728-30.  Back to cited text no. 3      
4.Hobo S. A kinematic investigation of mandibular border movement by means of an electronic measuring system: Part II: A study of the Bennett movement. J Prosthet Dent 1984;51:642-6.  Back to cited text no. 4      
5.Hobo S. A kinematic investigation of mandibular border movement by means of an electronic measuring system: Part III: Rotation center of lateral movement. J Prosthet Dent 1984;52:66-72.  Back to cited text no. 5      
6.Hobo S. Formula for adjusting the horizontal condylar path of the semiadjustable articulator with interocclusal records: Part I: Correlation between the immediate side shift, the progressive side shift, and the Bennett angle. J Prosthet Dent 1986;55:422-6.  Back to cited text no. 6      
7.Hobo S. Formula for adjusting the horizontal condylar path of the semiadjustable articulator with interocclusal records: Part II: Practical evaluations. J Prosthet Dent 1986;55:582-8.  Back to cited text no. 7      
8.Binkley TK, Binkley CJ. A practical approach to full mouth rehabilitation. J Prosthet Dent 1987;57:261-6.  Back to cited text no. 8      
9.Hobo S, Takayama H. Effect of canine guidance on the working condylar path. Int J Prosthodont 1989;2:73-9.  Back to cited text no. 9      
10.Hobo S. Twin-tables technique for occlusal rehabilitation: Part I: Mechanism of anterior guidance. J Prosthet Dent 1991;66:299-303.  Back to cited text no. 10      


    Figures

  [Figure 1], [Figure 2], [Figure 3], [Figure 4], [Figure 5], [Figure 6], [Figure 7], [Figure 8], [Figure 9], [Figure 10], [Figure 11], [Figure 12], [Figure 13]
 
 
    Tables

  [Table 1]


This article has been cited by
1 Multiple periradicular radiolucencies mimicking endodontic lesions in renal osteodystrophy of the mandible: a case report
P. Jalali,S. G. Kim
International Endodontic Journal. 2015; : n/a
[Pubmed] | [DOI]



 

Top
 
  Search
 
    Similar in PUBMED
   Search Pubmed for
   Search in Google Scholar for
 Related articles
    Access Statistics
    Add to My List *
* Registration required (free)  

 
  In this article
    Abstract
    Introduction
    Case Report
    Discussion
    References
    Article Figures
    Article Tables

 Article Access Statistics
    Viewed9632    
    Printed175    
    Emailed3    
    PDF Downloaded1734    
    Comments [Add]    
    Cited by others 1    

Recommend this journal